CLOSE
  • Cold Storage Construction APAC
  • Construction Demolition and Recycling
  • Roofing and Siding Systems
  • Doors and windows
  • HVAC
  • Steel Building APAC
  • Kitchen and Bath Europe
  • Construction Interiors
  • Construction Demolition and Recycling Europe
  • Construction MENA
  • Architectural Glass
  • Modular and Prefab Construction
  • Construction Engineering Services
  • Safety and Compliance Europe
  • Wall Systems
  • Waterproofing APAC
  • Flooring System
  • Forensic and Owners Representative
  • Startups APAC
  • Architectural Glass APAC
  • Roofing and Siding Systems Europe
  • Marine Construction
  • Mechanical Electrical and Plumbing
  • Construction Bidding and Auctions
  • Architecture and Design Services
  • Concretes, Aggregates and Materials
  • Safety and Compliance APAC
  • Construction Demolition and Recycling APAC
  • Steel Building Europe
  • Construction Consulting
  • Roofing Systems APAC
  • Workforce Management and Staffing
  • Construction Latam
  • Landscaping
  • Construction Marketing
  • Modular Construction APAC
  • Modular Construction Canada
  • Construction Engineering MENA
  • Swimming Pool Construction
  • Surveying Canada
  • Construction Engineering Canada
  • Specialty Construction
  • Commercial Contractors
  • Scaffolding Contractors
  • Building Restoration and Maintenance
  • Doors and Windows Canada
  • Sustainable Construction APAC
  • Construction Law
  • Architectural Glass Canada
  • Building Information Modeling APAC
  • Construction Staffing
  • Insulation, Coating and Waterproofing
  • Cold Storage Construction Canada
  • Construction Management Canada
  • Swimming Pool Construction Canada
  • Scaffolding Canada
  • Flooring System APAC
  • Pre-Construction Services
  • Construction Staffing Europe
  • Precast Concrete Europe
  • Apartment and Condominium Contractors Canada
  • MEP Canada
  • Foundation Construction Canada
  • Outdoor Construction
  • Construction Law APAC
  • Construction Saudi Arabia
  • MEP APAC
  • Decking Canada
  • Kitchen and Bath
  • Building Sealing Solutions Europe
  • Swimming Pool Construction APAC
  • Mould Remediation and Testing Europe
  • Mechanical Contractor Canada
  • Construction Consulting Europe
  • Construction Coating Europe
  • Landscaping Canada
  • Construction Management
  • Construction Management APAC
  • Flooring Systems Europe
  • Dummy
  • Commercial Contractors APAC
  • Commercial Contractors Europe
  • Concretes, Aggregates and Materials Europe
  • Concretes, Aggregates and Construction Materials APAC
  • Construction Cladding APAC
  • Concrete Canada
  • Residential Construction
  • Building Restoration and Maintenance Canada
  • Construction Interiors Europe
  • Modular and Prefab Construction Europe
  • Buinding Restoration and Maintenance Europe
  • Construction Forensic and Owners Representative Europe
  • Professional Services
  • Structures
  • Systems
  • Roofing and Siding Systems Canada
  • Professional Services Canada
  • Structures Canada
  • Systems Canada
  • Professional Services Europe
  • Structures Europe
  • Systems Europe
  • Training Services
  • Geotechnical Services Canada
  • Foundation Construction
  • Abatement Services
  • Screen Services
  • Architectural Fabrication Services
  • Construction Equipment
  • Exterior Construction
Skip to: Curated Story Group 1
Construction Business Review
US
EUROPE
APAC
CANADA
MENA
LATAM
AUSTRALIA
About Us Conference Partner With Us
  • US
    • US
    • EUROPE
    • CANADA
    • AUSTRALIA
  • Leadership Perspectives
  • Insights
  • News
  • Magazines

Thank you for Subscribing to Construction Business Review Weekly Brief

A featured contribution from Leadership Perspectives: a curated forum reserved for leaders nominated by our subscribers and vetted by the Construction Business Review Advisory Board.

Suntory Beverage & Food Asia Pacific

Kshitij Godbole, Vice President, Quality, Regulatory Affairs & Sustainability

Human Aspects in Root Cause Analysis that Technology Cannot Replace

Kshitij Godbole

Kshitij Godbole

Root cause analysis (RCA) is one of the fundamental aspects of problem solving in our drive for continuous improvement. Simply put, it is the process to determine the most basic cause of a problem or deviation. There are many tools and techniques available to conduct RCA, for instance the ‘Fishbone diagram’ and the ‘5xWhy’ tool to name a few. With the ever-increasing use of technology at our fingertips, there are now digital tools available to initiate and document the RCA, while facilitating remote collaboration between teams.


While technology is good to streamline workflows, the quality of the RCA still comes down to the human aspects – it is after all the human beings reviewing facts, determining the underlying cause, and generating effective corrective actions to mitigate and prevent the issue. Therefore, it is essential to understand the foundation principles upon which a good RCA practice is to be built in a manufacturing plant.


Examples of some bad practices are:


• The operator wasn’t aware of abnormalities (no top-down communication).


• The operator was aware of abnormalities but didn’t inform anyone (no bottom-up communication).


• Corrections were done without thorough RCA.


"If you wonder why you are facing repeat issues even though you have trained your management team on RCA techniques, and trained and retrained your line operators and supervisors on the revised SOPs, start with going to the production floor, and observe!"


• No cross-functional collaboration with other departments for RCA.


• No progress due to unclear responsibility.


• The deviation was handled without facts or going to Gemba.


In Suntory, we constantly use the term “Gemba”. This is a Japanese term which means “the place where value is created”. So gemba could mean the manufacturing line where product is produced. It could mean the convenience store where product is sold to consumer. What is not ‘gemba’ in this context, is for example, a meeting room! The quality of the RCA is reliant on the quality of the facts ascertained. So in order to gather the correct information, the value of going to the gemba cannot be overstated. In this context, we follow the principle of looking at what we call the ‘3Gen’:


Gemba: Spend time at the actual site of issue, not only in the meeting room


Gembutsu: Look at actual goods involved (machine, product etc)


Genjitsu: Gather facts- timelines, sequence of events etc


Remember: All information resides in the ‘3Gen’


This should be followed up with the ‘what/ where/ who/ when/ why’. Once the right information is obtained, it will aid in the 5xWhy, Fishbone analysis, or any other RCA techniques. Once you have established the root cause, then brainstorm to determine the corrective actions and preventive actions (CAPA). Put a plan in place to implement the CAPA while assigning clear roles and responsibilities with associated timelines. Finally, the case should not be closed until the effectiveness of the actions are verified over an appropriate period of time.


There is no substitute for walking the production areas, talking to the operators, and understanding how things are actually being done. Often, management assumes processes are done a certain way, while the reality on the production floor could be different. When such assumptions are made, it then leads to faulty RCAs. If you wonder why you are facing repeat issues even though you have trained your management team on RCA techniques, and trained and retrained your line operators and supervisors on the revised SOPs, start with going to the production floor, and observe!


The articles from these contributors are based on their personal expertise and viewpoints, and do not necessarily reflect the opinions of their employers or affiliated organizations.
The Leadership Perspectives forum brings together voices shaping the construction industry. Participation is by invitation only. It features leaders who are not merely observing industry changes, but actively contributing to them through operational expertise and project execution insights.
EDITOR'S CHOICE
Construction Business Review APAC
Follow on LinkedIn

About

  • Home
  • About Us
  • Partner With Us

Stay Connected

  • Subscribe
  • Newsletter
  • Sitemap

Contact Us

  • editor@constructionbusinessreview.com
  • sales@constructionbusinessreview.com
  • marketing@constructionbusinessreview.com

Legal

  • Editorial Policy
  • Privacy Policy
  • Terms of Use

© 2026 Construction Business Review APAC. All rights reserved.

This content is copyright protected

However, if you would like to share the information in this article, you may use the link below:

https://cold-storage-construction-apac.constructionbusinessreview.com/leadership-perspective/human-aspects-in-root-cause-analysis-that-technology-cannot-replace-nwid-2074.html

We use cookies on this website to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies. More info

I agree